Gb - Installation Instructions With Technical Data; Relationship To The Authorities - Jøtul F 602 Installation Instructions With Technical Data

ENGLISH
Table of contents
Installation manual with technical data
1.0 Relationship to the authorities ............ 20
2.0 Technical data........................................ 20
3.0 Installation ............................................ 21
4.0 Service ................................................... 22
5.0 Operational problems/troubleshooting 23
6.0 Recycling ............................................... 23
7.0 Guarantee terms .................................... 23
Figures............................................................. 40
Table of contents
General use and maintenance manual
6.0 Safety precautions
7.0 Choice of fuel
8.0 Use
9.0 Maintenance
10.0 Operational problems - troubleshooting
Register your fi replace at jotul.com for a
25-year warranty.
Product:
Jøtul
Room heater fired by solid fuel
Standard
:
Minimum distance to adjacent combustible materials:
Minimum distance to adjacent combustible materials:
Emission of CO in combustion products
:
Flue gas temperature :
Nominal heat output :
Efficiency
:
Operation range :
Fuel type :
Operational type
:
The appliance can be used in a shared flue.
Country Classification Certificate/ Approved by
standard
Norway Klasse II
SP Sveriges Provnings- och
Sweden SP
OGC
Forskningsinstitut AB
SP Swedish National
Testing and Research
EUR Intermittent EN
Institute
Follow user`s instructions. Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
Verwenden Sie nur empfohlenen Brennstoffen.
Respectez les consignes d'utilisation. Utilisez uniquement
les combustibles recommandés.
Serial no: Y-xxxx, Year: 200x
Manufacturer: 221546
Jøtul AS
POB 1441
N-1602 Fredrikstad
Norway
20
On all our products there is a
label indicating the serial number
and year. Write this number in the
place indicated in the installation
instructions.
Always quote this serial number
when contacting your retailer or
Jøtul.
Serial no.
1.0 Relationship to the
authorities
Installation of a fi replace must be according to local codes
and regulations in each country. All local regulations,
including those that refer to national and European
standards, shall be complied with when installing the
product.
Instructions for mounting, installation and use are enclosed with
the product. Prior to using the product the installation must be
approved by a qualifi ed person.
A product data plate in heat resistant material is located on the
heat shield under the product. This contains information about
identifi cation and documentation for the product.
2.0 Technical data
Material:
Finish:
Fuel:
Log length, max:
Flue outlet:
Flue pipe dimension:
Weight:
Product measures:
Technical data according to EN 13240
Nominal heat output:
Flue gas mass fl ow:
Recommended chimney draught:
Effi ciency:
CO emission (13% O ):
2
Flue gas temperature:
Operational type:
Intermittent combustion is here taken to mean normal use
of a fi replace. I.e. that a new fl ame chamber is lit as soon
as the fuel has burnt down to the appropriate quantity of
embers.
Wood consumption
Jøtul F 602 has a nominal heat output of 6,0 kW. Use of
wood, with nominal heat emission: Approx. 2,0 kg/h. Another
important factor for proper fuel consumption is that the
logs are the correct size. The size of the logs should be:
Kindling:
Length: 30 - 40 cm
Diameter: 2 - 5 cm
Amount per fi re: 8 - 10 pieces
Firewood (split logs):
Length: 40 cm
Diameter: Approx. 8 - 12 cm
Intervals for adding wood: Approx. every 45 minutes
Size of the fi re: 1,5 kg
Amount per load: 2 pieces.
Nominal heat emission is achieved when the air vent is
open approximately 50%.
Cast iron
Black paint, blue black enamel
Wood
40 cm
Top, rear
Ø125 mm/123 cm 2 cross section
78 kg
See fi g. 1
6,0 kW
6,9 g/sec
12 Pa
71% @ 6,1 kW%
0,28%
318 C
o
Intermittent