Configuring Your Access Point
This section will show you how to configure the device by
using the web-based configuration interface or EnGenius
EnWiFi App, which is a management tool to enable easy
deployment on outdoor APs/CPEs. In conjunction with the
EnWifi App, outdoor APs/CPEs can perform configuration
changes en-masse, monitoring, firmware upgrades, and
data backups from a smart phone or tablet.
Web Interface Configuration
Default Setting
Please use your Ethernet port or wireless network adapter
to connect the Access Point.
IP Address
Username / Password
1. Open a web browser (Internet Explorer/Firefox/Safari/
Chrome) and enter the IP Address http://192.168.1.1
Note: If you have changed the default LAN IP Address of
the Access Point, ensure you enter the correct IP Address.
192.168.1.1
admin / admin
2. The default username and password are admin.
Once you have entered the correct username and
password, click the Login button to open the web-base
configuration page.
* The model name will be varied by different models
3. If successful, you will be logged in and see the device's
User Interface.
25