Statement 1:
DANGER
Electrical current from power, telephone, and communication cables is
hazardous.
To avoid a shock hazard:
v Do not connect or disconnect any cables or perform
installation, maintenance, or reconfiguration of this product
during an electrical storm.
v Connect all power cords to a properly wired and grounded
electrical outlet.
v Connect to properly wired outlets any equipment that will
be attached
to this product.
v When possible, use one hand only to connect or disconnect
signal cables.
v Never turn on any equipment when there is evidence of
fire, water, or
structural damage.
v Disconnect the attached power cords, telecommunications
systems,
networks, and modems before you open the device covers, unles
instructed
otherwise in the installation and configuration procedures.
v Connect and disconnect cables as described in the following
table when installing, moving, or opening covers on this product
or attached devices.
To Connect:
1. Turn everything OFF.
2. First, attach all cables to devices.
3. Attach signal cables to connectors.
4. Attach power cords to outlet.
5. Turn device ON.
To Disconnect:
1. Turn everything OFF.
2. First, remove power cords from outlet.
3. Remove signal cables from connectors.
4. Remove all cables from devices.
vii
Safety