Configuring The Connection By Manual Selection - Toshiba e-STUDIO 165 Fax Manual

3) Network - Enable TCP/IP Search
Check on this to search devices that connect to the TCP/IP network. This is available only
when the TCP/IP protocol is installed in your computer.
When this is enabled, select how it searches printers in the TCP/IP network.
- Search local subnet — Select this to search devices in local subnet.
- Specify a range — Select this to search devices in specific range of IP addresses. When
this is selected, enter the IP addresses in "From" field and "To" field to specify the range.

— Configuring the connection by manual selection

You can configure the connection by entering the IP or IPX address of the device manually.
Configuring the connection manually and obtaining the address book data
1
Click the [Tools] menu and select [Device Setting].
The TopAccessDocMon Local Discovery dialog box appears.
2
Click [Manual Selection].
The Manual Selection dialog box appears.
Managing Address Book 73