Technical Specifications; Description Of Product Parts - GBC PRO SERIES Instruction Manual

Technical Specifications
Electrical
Machine Dimensions
Machine Weight
Maximum Pouch Width
Maximum Pouch Thickness
Maximum Thru-put Thickness
Warm-up Time
Display Panel
- Indicate that the machine is
ready to laminate.
HOT - Indicate that the HOT function
is selected.
COLD - Indicate that the COLD function
is selected.
- Indicate that the heater is operating.
MEAS - Indicate that measure roller temperature function is selected.
Switch Panel
Power ON/OFF the machine.
Preset mode for hot lamination.
Preset mode for cold lamination.
Display current roller temperature (approx. 3 seconds).
Reverse the revolution of the rollers to correct misfeeds.
Stop/start the revolution of the rollers.
4
GBC Pro Series 3600
™
220-240V / 50~60Hz / 1050W / 6.0A
540 x 271 x 112mm
15.0kg
330mm
2 x 350mic (Total 700)
3.0mm
6 minutes
GBC Pro Series 4600
™
220-240V / 50~60Hz / 1050W / 6.0A
691 x 271 x 112mm
20.0kg
480mm
2 x 350mic (Total 700)
3.0mm
6 minutes
TEMPERATURE - Indicate the temperature setting.
SPEED - Indicate the speed setting.
revolution.
revolution.
- Indicate that the cooling fan is operating.
Memory mode for saving frequent use
temperature and speed setting.
These keys are used to increase or decrease
temperature ( 0~140°C).
These keys are used to adjust the speed (1~9) of
the rollers. Speed 9 is the fastest speed.
Description of
product parts
Pouch Insertion Slot
1
Pouch Exit Outlet
2
Control Panel
3
Main Power Switch
4
Cable Socket
5
Power Cord
6
- Indicate that the roller is moving in reverse
- Indicate that the roller is moving in forward