TORO GM 345 / 325-D
Electrical Systems
65
Seat Switch and Traction Neutral Switch Testing
1. Raise off the seat and engage the PTO switch while the engine is running.
2. The engine should stop within 2 seconds.
If the engine stops, the switch is operating correctly.
If the engine does not stop, there is a problem in the seat switch of the PTO switch.
.
1. Raise of the seat and depress the traction pedal with the PTO disengaged.
2. The engine should stop within 2 seconds.
If the engine stops, the switch is operating correctly. If the engine fails to stop, there is a problem in the seat
switch or the traction pedal switch.
Notes
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________