First Time Installation - Usb Connections; Switching On/Off; First Time Installation; Media Playback Via Usb Input - Telefunken TFLS425090FHDB Operating Instructions Manual

Getting Started

First Time Installation - USB Connections

Switching On/Off

To Switch the TV On
Connect the power cord to the 220-240V AC, 50 Hz.
To switch on the TV from standby mode either:
To switch on the TV from standby mode either:
• Press the " " button, P+ / P- or a numeric button
on the remote control.
• Press the " " or P/CH+/- button on the TV.
The TV will then switch on.
Note: If you switch on your TV via P+ / P- buttons on the
remote control or P/CH+/- on the TV set, the programme that
you were watching last will be reselected.
To Switch the TV Off
Press the " " button on the remote control or press
the side function switch until the TV switches into
standby mode.
To power down the TV completely, unplug the
power cord from the mains socket.
Note: When the TV is switched to standby mode, the standby LED
can blink to indicate that features such as Standby Search, Over
Air Download or Timer is active. The LED can also blink when you
switch on the TV from standby mode.

First Time Installation

When turned on for the first time, the language selection
screen is displayed. Select the desired language and
press OK.
The First Time Installation (FTI) screen will be displayed
next. Set your preferences using the navigation buttons
and when finished, press OK to continue.
IMPORTANT : If you select France or Italy as country
option, the PIN code menu will appear and you will
have to enter 4-digit code. You will not be able to use
0000 as code (you are advised to write down this code.
Enter a PIN code and enter it again to confirm(you are
advised to write down this code on your instruction
manual so that you can remember it when you need
to use it). Press the OK button to continue.
WARNING : When prompted to enter a PIN code to
access a menu item, you have to use the code you set
during first installation. If you forget the said code,use
the main code 4725.
You can activate Store mode option to be available in
"Other settings" menu and your TV's features will be
illustrated on the top of the screen. a confirmation screen
will be displayed. Select YES to proceed.
If Home Mode is selected, Store mode will not be available
after the First Time Installation. Press OK button to
continue.
Aerial Installation
If you select AERIAL option from the Search Type screen, the
television will search for digital terrestrial TV broadcasts.
NOTE: You can press MENU button to cancel.
After all the available stations are stored, the Channel List
will be displayed on the screen. If you like how the channels
are sorted according to the LCN (*), please select "Yes"
and than press OK.
Press MENU button to quit channel list and watch TV.
(*) LCN is the Logical Channel Number system that
organizes available broadcasts in accordance with a
recognizable channel sequence (if available).
Cable Installation
If you select CABLE option and press OK button on the
remote control. To continue, please select YES and press
OK. To cancel operation, select NO and press OK. You can
select frequency ranges from this screen.
Enter the frequency range manually by using the numeric
button.
Note: Searching duration will change depending on the
selected search step.

Media Playback via USB Input

You can connect a 2.5" and 3.5" inch (hdd with external power
supply) external hard disk drives or USB memory stick to your
TV by using the USB inputs of the TV.
IMPORTANT! Back up your files before making
any connections to the TV. Manufacturer will not be
responsible for any file damage or data loss. Certain
types of USB devices (e.g. MP3 Players) or USB hard
disk drives/memory sticks may not be compatible
with this TV. The TV supports FAT32 and NTFS disk
formatting but recording will not be available with NTFS
formatted disks.
While formatting a USB hard disk that has 1TB (Tera
Byte) or more file capacity, you can experience problems
with the formatting process. Do not repeatedly quickly
plug and unplug the drive. This may cause physical
damage to the USB player and USB device itself. Do
not pull out USB module while playing a file.

Recording a Programme

IMPORTANT: When using a new USB hard disk drive, it
is recommended that you first format the disk using your
TV's "Format Disk" option.
Note : To record a programme, you should first connect a
USB disk to your TV while the TV is switched off. You should
then switch on the TV to enable the recording feature.
To use the recording function, you need to connect a
USB disk or an external hard disk drive to the TV and the
connected USB disk should have at least 1 GB capacity
and should have 2.0 speed compatibility. If the connected
English - 35 -