Battery Installation - Topcom CE0123 User Manual

• The tip of the probe is the most delicate part of the thermometer,
accurate readings from the thermometer can be obtained only if the
tip of the probe is clean and intact.
• To clean the tip of the probe, hold the thermometer downwards so
that no liquid can enter. Use a cotton swab moistened with alcohol to
wipe gently and carefully on the surface of the tip of the probe. Allow
an hour drying time before operating the thermometer again.
5 BUTTONS
See folded cover page
1. START - button
2. LCD display
3. Temperature LED indication
4. Infrared thermometer sensor
6 DISPLAY
A. Year
B. Date
C. Room- / Body temperature
D. Low battery icon
7

BATTERY INSTALLATION

1. Remove the battery cover
2. When the batteries are pre-installed.
Pull out the insulator.
3. If it is not pre-installed, insert a
CR2032 - 3V - Lithium battery with the
positive pole (+) facing upwards.
4. Reposition the battery cover.
Replace the battery when '
Take out the battery if you do not use it for a long time.
You have to dispose of the batteries in an environment
friendly manner according to your country regulations.
EAR & FOREHEAD THERMOMETER 201
5. Forehead probe
6. OK - button
7. SET - button
8. Battery compartment (1 x CR2032)
E. Measuring mode icon
F. Forehead mode icon
G. Ear mode icon
.
8
'
D
is displayed.
5