Automatic Switch On / Wake-Up Function; Entering A Switch-On Time; Wake-Up With Sound Signal (Date Reminder); Clearing The Wake-Up Function - Grundig Yacht Boy 360 Manual

Automatic switch on / Wake-up function

AUTOMATIC SWITCH-ON
Your radio allows you to enter a wake-up time (switch-on time).
When selecting the function 'Wake-up with radio', you will hear
the last received station.
The switching times refer to the clock time (TIME I or TIME II)
GB
indicated in the display.
Example:
You have entered the local time (e.g. CET or CEST) as TIME I.
TIME II stands for a second time zone (e.g. Greenwich Mean
Time/GMT).
You have entered 14.00 h as switch-on (wake-up) time and
activated the wake-up function.
– If the display indicates TIME I, the unit will be switched on
at 14.00 h local time.
– If the display indicates TIME II, the unit will be switched on
at 14.00 h of the second time zone.

Entering a switch-on time

• Switch on the radio.
• Enter the desired switch-on (wake-up) time with the
numeric buttons 0...9.
• Press the ON TIME button to store the entered switch-on
time in the memory.
• The switch-off time is automatically set to one hour after the
switch-on time.
• Select the desired wake-up mode by repeated pressures on
the AUTO button
– = Wake-up with radio programme.
You hear the station last tuned to.
– = Wake-up with sound signal.
The radio is muted and you hear a sound signal
instead. This function is also possible with the radio
switched on, e.g. to remind you at a date.
– -:-- = Wake-up function switched off.
ON-TIME TIME I
Checking the entered switch-on time
When the radio is switched off, the display indicates the
switch-on time and the wake-up mode.
20
Wake-up with radio / automatic switch-on
• Select 'Wake-up with radio' (symbol
AUTO button.
• Adjust the wake-up time.
• Before switching off the radio, tune to the station and adjust
the volume with which you wish to be woken up.
• Switch off the radio
– At the programmed time the radio is automatically switched
on.
• If no button is pressed, the radio will play for about 60
minutes and is then switched off automatically.
• If you press the SNOOZE button, the radio is switched off
for 5 minutes and the symbol is flashing in the display.
You can repeat this snooze function as often as desired.
• If you press the SNOOZE button longer than 2 seconds, the
radio is completely switched off. The
permanently indicated. The wake-up function is repeated the
next day.

Wake-up with sound signal (date reminder)

• Select 'Wake-up with sound signal' (symbol in display)
with the AUTO button.
• Adjust the wake-up time.
'Wake-up with signal sound' is possible if:
– the radio is switched off (wake-up),
– the radio is switched on (date reminder).
The radio is automatically switched off and the sound signal
is started.
If no button is pressed, the sound signal will last 5 minutes.
• If you press the SNOOZE button, the alarm sound will be
switched off for about 5 minutes and the symbol is
flashing in the display. The snooze function can be repeated
as often as desired.
• If you press the SNOOZE button for more than 2 seconds,
the alarm sound is completely switched off. The symbol is
permanently visible and the wake-up function will be
repeated the next day.

Clearing the wake-up function

• Switch off the wake-up function with the AUTO button (the
symbols and must disappear from the display.
When the radio is switched off:
– ON-TIME is not visible in the display.
– The indication -:-- appears instead of the programmed
wake-up time in the left numeric block in the display.
The programmed wake-up time remains stored in the
memory.
YB360 page 20
in display) with the
symbol is