Going To Sleep Listening To Music; Clock; Checking The Switch-On Time; Clearing The Switch-On Period Prematurely - Grundig Yacht Boy 360 Manual

Sleep

GOING TO SLEEP LISTENING TO MUSIC

You can enter a time period (60 minutes max.), after which the
radio switches automatically off.
• Press the SLEEP button
– When the radio was switched off, it will be switched on. The
further procedure is independant of whether the radio was
switched off or not.
– The switch-on period (period until the radio is switched off)
is 60 minutes.
The display indicates
for approx. 5 seconds
the remaining
switch-on period.
TUNING
0 ... 1 ... 2 ... 3 ... . 4 ... 5
It indicates in
addition SLEEP to
signal that the 'automatic switch-off function' is activated.
• Repeated pressures on the SLEEP button will reduce the
switch-on period in steps of 10 minutes.
Each time the SLEEP button is pressed, the display indi-
cates for approx. 5 seconds the remaining switch-on time.
When the switch-on period has been reduced to 0 seconds,
the unit switches off.
• A further pressure on the SLEEP button switches the radio
on again and the initial switch-on time of 60 minutes is
selected.
• Repeated pressures on the SLEEP button give the following
order: 60 -> 50 -> 40 -> 30 -> 20 -> 10 -> off -> 60 -> 50 ->....
The numbers indicate the minutes left till the automatic
switch-off.
– When the programmed switch-on period has elapsed, the
unit is switched off and the SLEEP indication goes out.

Checking the switch-on time

• Briefly press the SLEEP button
– The display indicates the time left till the automatic switch-
off.

Clearing the switch-on period prematurely:

• Switch off the unit with the POWER button or press the
SNOOZE button.
TIME I
SLEEP
FM
MHz

CLOCK

Also here, each entry step (button pressure) must be
completed within a period of 5 seconds.
You can enter clock times no matter whether the unit is
switched on or off.
There are several possible methods for entering clock and
switching times.
Examples:
Clock time
1st example: Clock time 6.30
2nd example: Clock time 15.00
3rd example: Clock time 0.15
Setting the clock time (TIME I)
Setting TIME I with the help of a reference clock.
Example TIME I : 6.30 h
The display must indicate TIME I
• Enter the clock time with the numeric buttons immediate-
ly before the reference clock changes from 6.29.59 to
6.30.00. The period between the last entry and 6.30.00 must
not exceed 5 seconds.
• Press the TIME 1/2 button at the moment when the
reference clock jumps from 6.29.59 to 6.30.00. When
pressing the TIME 1/2 button, the clock is started exactly
to the second and the minutes indication will flash.
Setting the clock (TIME II / clock time II)
• For setting TIME II follow the same steps, except that the
display must indicate TIME II.
• As the seconds of TIME II are running synchronously with
the seconds of TIME I it is not necessary to wait until the
minute changes.
Clock time indication (TIME I/II)
• You can switch
ON-TIME
between the
indications of the
two clock times by
pressing the TIME
1/2 button (no
numeric entry beforehand.
YB360 page 19
Clock
GB
Possible entries
6.30
06.30
15.
15.00
.15
0.15
00.15
TIME II
19