Caller-Id Function (Clip) - Topcom DIABLO 103 User Manual

Topcom Diablo 100/Twin/Triple/Quattro
5.10.3 Date time setting
After setting the internal ring melody and volume you can set the date and time:
DD-MM HH:MM (DD= day, MM=month, HH=houre and MM=minutes)
Enter the date and time using the number key. The flashing cursor can be moved by the scroll keys
. Press again to confirm the setting and to go to the next setting below.
5.10.4 Setting the Dial mode
After setting the date/time you can set the dial mode. There are two types of dialling mode:
- 1 - DTMF/Tone dialling (the most common) (default)
OR
- 2 - Pulse dialling (for older installations)
Press '1' or '2' and press
5.10.5 Setting the Flash time
After setting the Dial mode you can set the flash time. There are two flash times:
- 1 - 100ms
OR
- 2 - 250 ms
Press '1' or '2' and press
5.10.6 Base melody and volume
The base ringer is heard.
the scroll keys
and to go back to standby.
5.11 Keypad lock
When the keypad is locked, pressing any key will have no effect during standby (except holding the
key).
Press and hold the
the key again to un-lock the keypad
6

Caller-ID function (CLIP)

The Topcom Diablo displays the telephone numbers of incoming calls. This function is only possible if
you are subscribed to a telephone operator that provides this service. Contact your telephone provider
for more information. When you receive a call, the numbers are saved in a Call list. This list can hold 10
telephone numbers (each of max. 20 digits). If the number is longer then 12 digits, you can press the
program key to show the other digits!
6.1 New calls
When you've received a new unanswered call, the CLIP symbol
6.2 Consulting the Call list
Press the Call Log button
' is shown on the display. For answered calls the
appears Press the program
and time. Use the scroll keys
of the list an error tone will be sounded
button.
6.3 Calling a number from the Call list
Scroll through the Call list until the desired number is shown on the display.
button . The number will be dialled automatically.
6
again to confirm the setting and to go to the next setting below.
again to confirm the setting and to go to the next setting below.
Select the desired melody (1-5) by entering a number (1 - 5).
to select the desired volume (Off or 1-5)
key. appears on the display and the keypad is locked.
. The last received call is shown on the display. If the list is empty, '----------
key to show the other digits (if longer then 12) or to show the date
to scroll to the previous call. When you reach the top or bottom
-icon appears and unanswered calls the
You can leave the Call list by pressing the on-hook
Press again to confirm the setting
will blink on the display.
Press the Off-hook
Topcom Diablo 100/Twin/Triple/Quattro
Use
Press twice
-icon