Table of Contents
Advertisement
5.5
Direct access memory (Key 1,2,3 and M1)
The product has 3 locations (Key '1', '2' and '3') where you can store a number under and dial it by
pressing and holding one of these keys in standby. The phone will automatically take the line and dial
the number which is stored under this key. The number stored under key '1' can also be dialed out by
pressing the 'M1'-key shortly in standby.
5.5.1 Programing the direct memory keys
Press the Memory
button short. Press and hold the Memory button
the display. Press and hold one of the 3 direct memory keys (Key 1,2 or 3) where you want to store the
number under until 'Sx - _' appears.
the Memory button
appear. To leave the direct memory programming, press the On-hook button
5.6
Mute function
It is possible to deactivate the microphone during a conversation. Now you can speak openly without
being heard by your correspondent. Press the Mute button
activate the microphone.
5.7
Setting the volume
During a conversation you can set the volume by pressing the scroll button
volume between 1-5.
5.8
Paging
When you press the Paging button
This signal helps you find a lost handset. Press any key to stop the ringing on all handsets.
5.9
Flash button (R)
When you press the R button, also called flash or recall, the unit generates a line interruption (of 100 ms
or 250 ms). It gives you the possibility to use the special services of your telephone provider and/or to
transfer calls when you have a telephone exchange. You can change the flash time if needed (See
"Setting the Flash time" on page 6).
5.10
Programming procedure
You can change the ring melodie, volume, day, time etc... by going into the program procedure: To go
into the program procedure you have to press and hold the Program button
flash.
Press the Program button again to change the first setting. Each time you press the Program
button
you will confirm the previous setting and jump to the next setting:
External ring volume/melody
Dial mode setting
5.10.1 Handset External melody and volume
Press and hold the Program button
again, the external melody is heard and the EXT-icon is flashing.
by entering a number (1 - 5).
Press
again to confirm the setting and to go to the next setting below.
5.10.2 Handset Internal melody and volume
The internal melody is heard and the INT-icon is flashing.
entering a number (1 - 5).
Press
again to confirm the setting and to go to the next setting below.
Topcom Diablo 100/Twin/Triple/Quattro
Enter the telephone number you whish to store.
again to confirm.
You will hear a confirmation tone and the next entry will
on the base unit, the handset emits a ringing signal for 20 seconds.
Internal ring volume/melody
Flash time setting
until the icon
Use the scroll keys
Use the scroll keys
Topcom Diablo 100/Twin/Triple/Quattro
until the
during a conversation. to deactivate or
until the icon
Date/time setting
Base ring volume/melody
starts to flash.
Press the Program button
Select the desired melody (1-5)
to select the desired volume (Off or 1-5)
Select the desired melody (1-5) by
to select the desired volume (Off or 1-5)
-icon appears on
Press
.
. You can set the
starts to
5
Advertisement
Table of Contents
