Table of Contents
Advertisement
Topcom Diablo 100/Twin/Triple/Quattro
4
Battery low indication
When the battery is empty, the handset no longer carries out operations. When a battery is completely
empty and you have put the handset on the base unit for a short period of time, the Battery symbol will
appear to be fully charged but this is actually not the case. The battery capacity will decrease rapidly.
We advise you to put the handset on the base unit for 12 hrs so that it can be recharged completely:
Full battery
When you are in the middle of a conversation and the battery is almost empty, the handset will emit a
warning signal. Place the handset on the base unit to charge.
5
Operation
5.1
Outgoing calls
5.1.1 Making a phone call or redialing the last number
Press the Off-hook button
press the Redial key
you want to terminate the call.
5.1.2 Call setup with dial preparation
Enter the desired telephone number. An incorrect number can be corrected by means of the Mute
button.
Press the Off-hook button
hook button
when you want to terminate the call.
5.1.3 Redial one of the last 5 numbers dialled
Press the Redial key
of the last 5 numbers dialled, press the scroll keys
on the display.
Press the Off-hook key
automatically.
After finishing your call, press the On-hook key
5.2
Incoming calls
When a call comes in, the handset will start to ring.
incoming call. To end the call press the On-hook button.
5.3
Programming memory numbers
You can program 10 indirect numbers (of max. 24 digits) in the phone's memory.
Press the Memory
Memory button
until the
to store the telephone number under.
the Memory button
appear. To leave the memory programming, press the on-hook
If you wish to insert a pause, press the Redial/Pause button
you want a pause of 3 sec.
5.4
Calling a memory number
Press the Memory button
Press the Off-hook button
hook button
to terminate the call.
4
Empty battery
. You will hear the dial tone.
to dial out the number you last called.
. The number will be dialled automatically.
. The number you last called appears on the display. If you would like to dial one
button short. The first entry will be shown on the display
-icon appears on the display.
again to confirm.
Scroll with the Up/Down keys
. The memory number will be dialled automatically.
Enter the desired telephone number or
a few times until the desired number appears
.
The number shown on the display is dialled
Press the Off-hook button
Enter the telephone number you whish to store.
You will hear a confirmation tone and the next entry will
Press the on-hook button
to hang up.
Enter the location (0-9) where you want
button.
on the location where
/P
to the entry you want to dial (0-9).
Topcom Diablo 100/Twin/Triple/Quattro
when
Press the On-
to answer the
Press and hold the
Press
Press the On-
Advertisement
Table of Contents
