Selecting A Base; Sms; How To Write An Sms; Sending An Sms - Topcom Balance User Manual

SMS

8.4

Selecting a base

You can switch your handset between bases. The handsets can be registered up to 4 bases
simultaneously. When selecting the base, the current selected base is indicated by a blinking base
number.
If you select "AUTO" the handset will automatically search for another base when you are out of
range. The handset must first be registered with each base individually.
When you have activated Automatic base selection and the handset is out of range
on the current base, the handset will only search for the strongest base in standby
(not during communication).
9 SMS
You can send and receive SMS with your Topcom Balance telephone. This section tells you how
to use the SMS feature.You can store a total of 15 SMS messages sent and received, each with up
to 160 characters.
Before sending and receiving SMS text messages you need to set the telephone
number of your Network's SMS centre for outgoing and incoming messages
(See " SMS service centre numbers").
9.1

How to write an SMS

The method is the same as entering a name in the phonebook (See "3.15 Using the alphanumerical
keypad").
To enter a space press '1'.
9.2

Sending an SMS

4 5 6
GHI JKL MNO
4 5 6
GHI JKL MNO
20
The handset will start searching for the DECT base. If the handset has located
the base, it will display the base identification number.
7 Confirm or stop.
1 Enter the menu
2 Select "REGISTER" and confirm.
3 Select "SELECT BASE" and confirm.
4 Select a base or select "AUTO" and confirm.
1 Enter the menu
2 Select "SMS" and confirm.
3 Select "WRITE" and confirm.
4 Start writing the message and confirm.
5 Enter the telephone number and confirm to send the message.
The SMS will be sent out automatically.