Making An Internal Telephone Call; Internal Call Transfer; Conference Call; Handsfree Mode - Topcom Balance User Manual

Using the telephone
Pre-dialing
4 5 6
GHI JKL MNO
3.5

Making an internal telephone call

INT
4 5 6
GHI JKL MNO
3.6

Internal call transfer

Transfer an external call to an other handset.
INT
4 5 6
GHI JKL MNO
INT
3.7

Conference call

Only possible when more then one handset are registered to the base!
You can converse simultaneously with an internal correspondent and an external correspondent.
During an external call:
INT
4 5 6
GHI JKL MNO
#
INT
3.8

Handsfree mode

You can speak with your correspondent without picking up the handset.
3.9

Speaker volume during call

The handsfree volume is also adjusted together with the receiver in the handset as
above described.
10
1 Dial the telephone number.
2 Press the off-hook key to start the call.
3 Press the on-hook key to hang up or put the handset back on the base.
1 Press the internal call key.
2 Enter the number of the internal handset (1 to 5).
3 Press the on-hook key to hang up or put the handset back on the base.
1 Press the internal call key.
2 Enter the number of the internal handset (1 to 5), the external caller is put
on hold.
3 When the other handset picks up, press the on-hook key to hang up and
transfer the call.
If the internal correspondent does not pick-up, press the Internal call key again
to reconnect to the external caller on line.
4 Press the on-hook key to hang up or put the handset back on the base.
1 Press the internal call key.
2 Enter the number of the internal handset (1 to 5).
3 When the other handset picks up, press and hold the ' ' key.
If the internal correspondent does not pick-up, press the Internal call key again
to reconnect to the external caller on line.
4 Press the on-hook key to hang up or put the handset back on the base.
1 Press the handsfree key during a call to activate or deactivate the handsfree
mode.
1 During a conversation, press the up or down key to change the volume
accordingly.
#