2.4.2
32
Mounting the terminal
4.
Make all external electrical connections to the terminal blocks.
It is much easier to do this without the unit in place.
5.
Mount the side plates (posNo 2) to the terminal.
6.
Mount the terminal to the mounting bars.
Preparing a wall mounted terminal for electrical installation
Procedure
1.
Remove all screws from one side plate.
2.
Remove two screws from the other side plate.
3.
Careful swing the terminal out from the wall.
See
figure 5.
Figure 5:
View from above over a wall mounted terminal that is pre-
pared for electrical connection.
Chapter 5
Installing the terminal
xx99000287