Planning A Trip Using Your Voice - TomTom GO 740 LIVE User Manual

For some phrases, your GO will always repeat the command and then ask
you if the command has been correctly recognized.
3. If the command is correct, say, "Yes."
If the command is incorrect, say, "No" and when prompted, say the
command again after the beep .
Your GO plans a route from your current position to your Home address.
Tips
• Voice recognition switches off after a few seconds if you don't say anything.
For example, if your GO asks you to confirm the last command you gave
and you don't say anything, voice recognition switches off after a few
seconds.
• You can stop your GO from listening for commands either by tapping the
screen or by saying any of the following commands: Back, Cancel, Quit.
• To select an item from a list, tap the screen to select the item. Voice
recognition cannot be used to select items from a list.

Planning a trip using your voice

Important: You should always plan your journey before you start driving. It is
dangerous to plan a route while driving.
To plan a route to an address using speech, do the following:
1. Tap the voice recognition button in the Driving View.
2. When you hear a beep, say, "Navigate to address."
When you speak, the voice recognition monitor shows if you are
talking too loudly or quietly:
For some phrases, your GO will always repeat the command and then ask
you if the command has been correctly recognized.
A red bar means your voice is too loud.
A grey bar means your voice is too quiet.
A green bar means your voice is at the right level for your GO
to hear your commands.
A red bar means your voice is too loud.
A grey bar means your voice is too quiet.
14