Advertisement
Tip: For the best recognition of what you say, speak normally without trying to articulate words in
an unnatural way. If there is excessive road noise, for example, you may need to speak in the
direction of the microphone.
3. If the command is correct, say "Yes."
If the command is incorrect, say "No" and repeat the command after you hear the prompt and tone
again.
Your GO LIVE plans a route from your current location to your destination.
Tip: To stop your GO LIVE from listening for further commands, say "Cancel." To go back one step,
say "Back."
Planning a trip using your voice
Note: It's not possible to plan a route using your voice for all maps in all countries, or in all
languages.
You can navigate to any of the following types of places using your voice:
An address, including home.
Cities and towns and their centers.
Favorites.
POI categories.
POIs for named brands of, for example, restaurants, gas stations, car rental companies and gyms.
A recent destination.
To plan a route to an address using speech, do the following:
1. Tap the voice control button in the Driving view.
2. When you hear the tone, you can say, for example "Drive to an address."
Tip: Your device has either Navigate to or Drive to on the button in the Main Menu. When
planning a route to an address using speech, say "Navigate to address" if the button shows
Navigate to or "Drive to address" if the button shows Drive to.
3. Say the full address for your destination, for example, 112 Main Street, Riverside, California.
Numbers can be pronounced naturally or one at a time. For example, 357 can be pronounced as
"Three fifty seven" or "Three, five, seven."
Your GO LIVE tells you what it heard.
4. Say "Yes" if the address is correct. If shown a list of addresses, say the list number for the correct
address or say "none of these."
If part of the address is incorrect, you can say something like "change the number," "change the
street," "change the city" or "change the state" to correct the incorrect part.
To begin again, say "start over."
Tip: You may want to limit the search area for addresses to one state if you drive within the same
state most of the time. To change the search area for addresses, tap Settings in the Main menu
then tap Voice control and then tap Set address search area.
23
Advertisement
