Planning A Journey Using Your Voice - TomTom GO User Manual

For some phrases, your GO will always repeat the command and then ask
you if the command has been correctly recognised.
3. If the command is correct, say, "Yes."
If the command is incorrect, say, "No" and when prompted, say the
command again after the beep .
Your GO plans a route from your current position to your Home address.
Tips
• Voice control switches off after a few seconds if you don't say anything. For
example, if your GO asks you to confirm the last command you gave and
you don't say anything, voice control switches off after a few seconds.
• You can stop your GO from listening for commands either by tapping the
screen or by saying any of the following commands: Back, Cancel, Quit.
• To select an item from a list, tap the screen to select the item. Voice control
cannot be used to select items from a list.

Planning a journey using your voice

Important: You should always plan your journey before you start driving. It is
dangerous to plan a route while driving.
To plan a route to an address using speech, do the following:
1. Tap the voice control button in the Driving View.
2. When you hear a beep, say, "Navigate to address."
When you speak, the voice control monitor shows if you are
talking too loudly or quietly:
For some phrases, your GO will always repeat the command and then ask
you if the command has been correctly recognised.
You can now enter an address using speech.
Alternatively, you can tap the screen to start planning a journey, then tap
Spoken address (dialogue) or Spoken address to start entering an address
by voice.
3. Say the city name.
A green bar means your voice is at the right level for your GO
to hear your commands.
A red bar means your voice is too loud.
A grey bar means your voice is too quiet.
14