Table of Contents
Advertisement
To insert an access code
This means the access code
will be automatically dialled
before any number stored in
the Caller Display calls list.
Press the INT button.
INT
Press the SET button.
SET
GHI
Press the 4 button then press
4
the 0 button.
0
Press the OK button.
OK
Enter the base station PIN
KEYPAD
(original setting 0000).
Press the OK button.
OK
Enter the access code for your
KEYPAD
switchboard (this can be up to
3 digits).
Press the OK button to confirm.
OK
Press the RED PHONE button
to return to standby.
•You can store
as the digit keys
•You may find it useful to enter
(for BT Chargecard access) as one of
the access codes, together with an access
pause of six seconds – see 'To set the
access pause' opposite.
54
All manuals and user guides at all-guides.com
Note
✱
#
RCL
,
, and
as well
0-9
.
144
To set the access pause
You can change the length
of an inserted pause before
the dial tone commences. The
standard setting is for a three
second pause.
Press the INT button.
INT
SET
Press the SET button.
GHI
4
Press the 4 button then press
the 1 button.
1
Press the OK button.
OK
Enter the base station PIN
KEYPAD
(original setting 0000).
Press the OK button.
OK
KEYPAD
Enter the length of pause
required by your switchboard:
1 for 1 second.
1
ABC
2 for 2 seconds.
2
DEF
3 for 3 seconds.
3
GHI
4 for 6 seconds.
4
Press the OK button to confirm.
OK
Press the RED PHONE button
to return to standby.
Advertisement
Table of Contents
