Table of Contents
Advertisement
You now have up to 1 minute to
register the handset, during which the
beeps will continue.
At the base station:
Press and hold down the
PAGE button (for about 10
seconds) until you hear a tone.
The handset will display the
available handset numbers
e.g. 2, 3, 4, 5, 6.
N.B.: There is a small delay
before these numbers are
displayed on the screen.
Select and enter one of these
numbers. This is now the
handset's internal number and
is registered with the base
station, e.g. Base 2 stops
flashing.
48
All manuals and user guides at all-guides.com
Note
To de-register a handset
A de-registered handset cannot
be used to make calls at this
base station, e.g. to protect
against unauthorised use.
Press the INT button.
INT
Press the SET button.
SET
DEF
Press the 3 button.
3
MNO
Press the 6 button.
6
Press the OK button. Display
OK
shows De-Register Hset.
Enter the system PIN number
KEYPAD
(original setting 0000). Display
shows all registered handsets.
Press the OK button.
OK
Press the number of the
KEYPAD
handset you wish to delete.
Press the OK button to confirm.
OK
Advertisement
Table of Contents
