BT Diverse 3010 Micro User Manual page 10

Setting up
Follow these steps to get
your Diverse 3010 Micro
ready for use
Your handset is already
"registered" to the Diverse
3010 Micro base station.
Plan where you will put your Diverse 3010
Micro. It should be within two metres of
a power socket and the phone socket.
1 Connect the power cable
Plug the power cable into the power
socket on the underside of your
Diverse 3010 Micro. The power cable
connector is coloured red. Please take
care that the telephone cord and
power cable plugs are connected to the
correct socket as incorrect placement
could damage the base station.
6
All manuals and user guides at all-guides.com
Note
WARNING
It is recommended that the telephone line
cord is not connected until the handset is
fully charged. This will prevent the risk of
the phone being answered prior to the
batteries being fully charged and therefore
not achieving their optimum capacity.
2 Plug the 3 pin adaptor
into a mains power socket
and switch on
Red socket