Recovering the server blade BIOS
Ê Press the KVM button on the control panel of the server blade (see operating
manual) to switch the keyboard, mouse and monitor of the KVM blade to the
server blade.
Ê Switch on the server blade, see operating manual.
After a short beep, the BIOS is uploaded. The status of the flash process is
displayed on the KVM console. After the flash is completed, instructions are
displayed for the following procedure:
Ê Switch off the server blade.
Ê Remove the server blade and open it.
Ê Set switch 3 of the DIP switches on the system board to OFF.
Ê Close the server blade and reinstall it.
Ê Now you can put the server blade back into operation.
44
Service Supplement
BX620 S6