Replacing The Tpm - Fujitsu PRIMERGY BX620 S6 Service Supplement Manual

Replacing the TPM

4.5 Replacing the TPM
V
CAUTION!
Make sure you observe the safety notes in the
instructions" on page
Requirements
– The server blade has been removed from the basic unit.
– The cover of the server blade has been removed.
V
Caution
Advise the customer that he must provide you with TPM backup copies.
For security reasons, the TPM must be restored/re-saved by the
customer. If the customer DOES NOT have a backup copy available,
inform him that replacing the TPM will cause him to lose all his data.
Ê Remove the system board as described in
system board" on page
Ê Turn the system board so that the components face down and place it
carefully on a smooth, antistatic surface.
The TPM screw has a slot groove at the end (see following figure):
Figure 15: TPM screw with slot groove at the end
32
13.
30.
Service Supplement
chapter "Safety
section "Installing/removing the
BX620 S6