Sagem MyX-4 Technical Documentation Manual page 57

MyX-4
Tools :
- A 0.6mm torx screwdriver
- gloves
- Display / metal dome jig
Notice:This procedure must be performed by an technician provided with gloves , to avoid any risk
of pollution.
• Display contacts must never be touched.
Preliminary operation
1. Remove the back cover (
2. Remove the battery (
3. Remove the front cover (
4. Remove the assembly flange (
Removal procedure :
1. Turn the display round (2) to the right of the electronic board (1)
2. Push on the flex PCB (3) to liberate the display board to board connector
3. Remove the display (2)
Placement procedure :
1. Position the display (2) in its housing first
2. Position the display board to board connector on the electronic board connector (4) and press into
locked position
Further operations :
1. Remove the assembly flange (
2. Replace the front cover
3. Replace the battery (Proc sheet 0
4. Replace the back cover
1. Carry out the radio test
.
Ref. SCT U33 SM DTS 004– Index A - 29/03/01
REMOVING / REPLACING THE DISPLAY
Proc sheet 0 01).
Proc sheet 0 02).
Proc sheet 0 03).
Proc sheet 1 01).
Proc sheet 1 01).
(Proc sheet 0 03).
02).
(Proc sheet 0 01).
(Test Sheet 06).
Proc Sheet 1 02
1/2
Page 5-20