Adjusting The Volume; Bypass/Mute - Korg Pandora Stomp Owner's Manual

In addition, an assigned program can be selected with the foot switch. Pressing the
→ → → →
foot switch repeatedly cycles through the programs in the order A B C D
A... (see p.25).
Programs cannot be assigned with the foot switch.

Adjusting the volume

Use the Utility mode to adjust the volume level coming from the OUTPUT jack (see
p.24), and use the VOLUME dial to adjust the volume level of the headphones.
To adjust the volume for each program, use the Program Level parameter in Edit
mode (see p.22).

Bypass/Mute

The process differs depending on the foot switch operation
setting (see p.25).
ALt: Pressing the foot switch repeatedly will cycle between
the programs and as well as bypassing them.
A-d, 0-9: Pressing and holding down the foot switch will
bypass the effects.
With either process, the effect chain indicators on the LCD
will blink, "BYPASS" will appear, and the PANDORA
stomp will enter Bypass mode. If the foot switch is held down, the effect chain indica‐
tors will blink rapidly on the LCD, "MUTE" will appear, and the PANDORA stomp
14