Troubleshooting - Binatone Spirit 410 User Manual

8. Troubleshooting

!
The Spirit 410 must be serviced by trained engineers. NEVER attempt
any repairs or adjustments yourself - you could make the problem
worse and invalidate the guarantee.
ALWAYS check
first that:
"I cannot make or
answer calls."
"The phone does
not ring"
"The Caller Display
feature isn't
working"
"ERROR message
is displayed"
Binatone Help Line - 0845 345 9677
you have followed the steps listed on Section 2 to
install and set up your Spirit 410.
all connectors are firmly inserted in their sockets.
the batteries are correctly and securely installed,
and are not run down.
Everyday use
Make sure you're using the telephone line cable that
supplied with your Spirit 410. Other telephone line
cables might not work.
Make sure you're using the telephone line cable that
supplied with your Spirit 410. Other telephone line
cables might not work.
Check that the total REN value of all equipment
connected to your telephone line is not more than 4.
Disconnect one or more telephones.
You need to subscribe to the Caller Display service
from your network service provider. Contact the local
network service provider for details on how to subscribe.
The caller may have withheld their number by dialing
141. Or they may be calling from a network that does
not transmit the caller's number (e.g. it may be an
international call.)
ERROR appears in the display if the unit detects
anything other than valid Caller Display information
during silent period after the first ring. This message
indicates either the presence of noise on the line, or
that an invalid message has been sent from the network
service provider.
Be sure to wait until the second ring before answering.
Calls are charged at Local Call rate.
14