Summary of Contents for John Lewis Amy White Chair
Page 1
John Lewis Amy White Chair Stock number: 816/31165 Thank you for purchasing this product. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Pre-assembly preparation Please ensure instructions are read in full before attempting to assemble this product.
Page 2
Fittings and parts checklist Back Cushion Gas Lift Seat Cushion 1-3/8” Screws 7/8” Screws Seat Plate x1 1-1/4” Screws Arm x 2 Base x 1 1-3/4” Screws Allen Key x 1 Casters x 5...
Page 3
Step by step assembly instructions Step One 1. Turn the base (E) upside down on a protective surface, press the casters (F) into the holes at the end of each leg. ______________________________________________________________ Step Two 1. Turn the base (E) upright and insert the gas lift (G) into the center hole of the base (E).
Page 4
____________________________________________________________ Step Three 1. Place the seat plate (C) on the bottom of seat cushion (B), align the seat plate so the FRONT on the seat plate (C) matches the FRONT label on the bottom of seat cushion (B), insert the 1-3/8” screws (H) into the front holes of seat plate (C) and 7/8”...
Page 5
______________________________________________________________ Step Five 1. Place the assembled chair on top of gas lift (G) and press down untill fully engaged. _________________________________________________________ Step Six 1. Assemble the arms (D) onto the sides of the seat cushion (B) and back cushion (A) by using 1-3/4” screws (K) with the Allen Key (L).
Operating instructions Chair Height Adjustment While seated, lean forward and reach under the right side of the chair to find the handle. Lift the handle and raise your body up slightly to allow the chair to rise to the desired height. To lower the seat, lift the handle while applying more weight downward on the seat.
_______________________________________________________________ Tilt Lockout Operating While seated, reach under the left side of the chair to find the handle. When the handle is placed in the level position, leaning back to allow the chair to tilt backwards, push down the handle to lock the chair angle while the desired position is reached.
Page 8
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE ohn Lewis Partnership 171 Victoria Street London SW1E 5NN www.johnlewis.com...