John Lewis Amy White Chair Manual page 4

____________________________________________________________
Step Three
1. Place the seat plate (C) on the bottom of seat cushion (B), align the seat plate so the FRONT on
the seat plate (C) matches the FRONT label on the bottom of seat cushion (B), insert the 1-3/8"
screws (H) into the front holes of seat plate (C) and 7/8" screws (I) into the rear holes of seat
plate (C), tighten the screws by using the Allen Key (L).
__________________________________________________________
Step Four
1. Place the back cushion (A) on a protective floor, put the seat cushion (B) with seat plate (C) on a
right angle and assemble the back support plate on back cushion (A)
by using 1-1/4" screws (J) with Allen Key (L). Do not tighten the screws completely.
over the seat plate (C)
4