Toastmaster TMSM350 Use And Care Manual page 9

How To Use Your
Electronic Stand Mixer (cont.)
8. Plug into 120 V ~ 60 Hz outlet. Turn the Variable Speed Control
to the
the ON position. The Power Light will come on.
NOTE: Always start mixing on the Minimum speed. The
operating speed increases as the Variable Speed Control is moved
from
Select the desired speed. Refer to mixing guide on page 5 for
further information.
9. Turn the Mixer speed to the
ON/OFF Power Switch to OFF position before attempting to
scrape sides or bottom of Stainless Steel Mixing Bowl.
NOTE: DO NOT scrape sides or bottom of Stainless Steel Mixing
Bowl while Mixer is in operation.
10. The Turbo Button may be used at any speed setting to obtain the
Maximum power lever for tough mixing tasks.
11. Once all ingredients have reached the desired consistency, turn
the Variable Speed Control to the
slide the ON/OFF Power Switch to the OFF position. The Power
Light will go off.
12. Unplug cord from outlet.
13. Press and hold the Release Button while raising the Mixer Head.
14. Press the Eject Button and remove the Beaters, Wire Whisk or
Dough Hooks. Gently scrape excess batter from Beaters or Dough
Hooks with a rubber or plastic spatula. Do not strike Beaters or
Dough Hooks against Mixing Bowl to remove excess batter. This
could damage the Mixer parts.
15. Carefully remove Mixing Bowl from Turntable. Pour ingredients
from bowl into desired container. Use only a rubber or plastic
spatula to remove batter from Mixing Bowl.
Electric Stand Mixer Use and Care Guide
8.
Minimum position. Slide the ON/OFF Power Switch to
Minimum to Maximum speed, see FIGURE 5.
Minimum position and the
Minimum position and