Specifications - Extron electronics Matrix 3200 Series User Manual

im Vertrieb von

Specifications

_______
www.camboard.de
1-3
CAMBOARD Electronics
Introduction and Features • FPC 1000 Front Panel Controller • Chapter 1
The FPC 1000 is built in two sizes, one to fit in a 5U enclosure and one for a 7U
enclosure. Otherwise, appearance and operation are the same. Each version is
made up of a metal panel with an LCD display, 12 buttons and a knob. There are
two tabs that hold the bottom in place and two 1/4-turn captive screws to hold the
top in place. The slots in the screws can accommodate a screwdriver or a small
coin. The FPC 1000 is an option in a Matrix 3200/6400 Series Matrix Switching
system, but one unit provides Front Panel operation for one system. It is installed
in the master unit (BME #0) – normally the top unit. The only electrical
connection to the system is through an RJ-45 cable. See Chapter 2 for
installation.
The two panel dimensions are:
FPC 1000 for 5U __ 88-295-02
__ 6.475" H x 13.980" W (16.45 cm x 35.51 cm)
__ with rounded corners (R=.250)
FPC 1000 for 7U __ 88-295-01
__ 8.475" H x 13.980" W (21.526 cm x 35.51 cm)
__ with rounded corners (R=.250)
LCD display:
pixel array __ 320 x 240
Speed knob:
operation __ endless (no physical max/min limits)
Tel. 07131 911201
Matrix 3200/6400 Series Switchers • FPC 1000 • User's Manual • Extron
Fax 07131 911203
ce-info@camboard.de