Figure 3-17. Status/Remote Menu Showing Mkp/Mcp 1000S And Their Status - Extron electronics Matrix 3200 Series User Manual

im Vertrieb von
Chapter 3 • Using the FPC 1000 Front Panel Controller
Status Menu – MKP Mode
To get here from the Main Menu,
• Status
• Remotes
Figure 3-17. Status/Remotes menu showing MKP/MCP 1000s and their status.
_______ See MKP 1000 User's Manual (68-355-01) or MCP 1000 User's Manual
www.camboard.de
Extron • Matrix 3200/6400 Series Switchers • FPC 1000 • User's Manual
CAMBOARD Electronics
The Remote button displays information about the remote keypads and panels.
The example in Figure 3-17 shows the address, mode, configuration and
currently selected input number for each MKP/MCP 1000 on the system.
Address = This is the number programmed into that MKP 1000 or MCP 1000.
Mode = Each MKP 1000 or MCP 1000 is programmed to one of 3 modes:
Output, Room Preset or Global.
Config = For Output mode, this is the local output number assigned to this MKP/
MCP 1000. For Room Preset mode, this is one of 10 presets currently
assigned to this MKP 1000 or MCP 1000 "Room". "Config" does not apply to
Global mode.
Input = the input number currently selected by the MKP 1000.
press:
Update – This button checks for the latest MKP 1000 and MCP 1000 status and
updates the displayed information.
ESC – Press ESC to return to the previous status menu.
(68-456-01) for more information.
Tel. 07131 911201
Fax 07131 911203
ce-info@camboard.de
3-18