Epub_Prc_Power_Error Isolation Procedure; Epub_Prc_Memory_Ue Isolation Procedure - IBM Power Systems 7063-CR1 Service Manual

v To list SELs by using the Petitboot command line, use the following command:
ipmitool sel elist
v To list SELs remotely over the LAN, use the following command:
ipmitool -I lanplus -U <username> -P <password> -H <BMC IP addres or BMC hostname> sel elist
4. Identify all SELs with the value OEM record df and Correctable Machine Check Error or Transition
to Non-recoverable in the description. Did you find one or more SELs with the value OEM record df
and Correctable Machine Check Error or Transition to Non-recoverable in the description?
If Then
Yes: Continue with the next step.
No: Go to "Contacting IBM service and support" on page 35. This ends the procedure.
5. For each of the SELs that you identified in step 4, determine the sensor name that is associated with
each SEL. Replace the following items, one at a time, until the problem is resolved:
Note: To identify the physical location and removal and replacement procedure, see "7063-CR1
locations" on page 37.
v If the sensor name is CPU Func 1 or CPU Core Func x, where x is 1 - 12, replace system processor
CPU 1.
Does the problem persist?
If Then
Yes: Replace the system backplane. If the replacement of the system backplane does not resolve
the problem, go to "Contacting IBM service and support" on page 35. This ends the
procedure.
No: This ends the procedure.

EPUB_PRC_POWER_ERROR isolation procedure

A power problem occurred.
Perform the service action indicated for any system event logs that are related to power and occurred
prior to the problem that you are working on. Go to "Identifying a service action by using FQPSPxxxxxxx
events and system event logs" on page 8. This ends the procedure.

EPUB_PRC_MEMORY_UE isolation procedure

An uncorrectable memory problem occurred.
1. Look for system event logs that are related to memory and occurred around the same time as the
problem that you are working on. Go to "Identifying a service action by using FQPSPxxxxxxx events
and system event logs" on page 8. Did you find any system event logs that are related to memory?
If Then
Yes: Perform the service actions indicated for the system event logs that are related to memory.
This ends the procedure.
No: Continue with the next step.
2. Use the following table to determine the service action:
32
Problem analysis, system parts, and locations for the 7063-CR1