Bosch Rexroth SD301 Manual page 43

Blocked for new applications / Für Neuanwendung gesperrt
3 608 876 621/06.03 | SD301
6 Menus when connecting the SD301 to a KE3xx
Pressing the Start button (3) starts the tight-
ening application. The button is displayed in-
versely during the sequence test. The
inversion ceases once the sequence ends.
Pressing the Loosen button (2) starts the
loosening program (program 99 (Ccw)) inde-
pendently of the selected tightening applica-
tion. The button is displayed inversely during
the sequence test. The inversion ceases
once the sequence ends.
Pressing the Stop button (4) ends the run-
ning application prematurely.
The Reset button (5) acknowledges class 3
errors.
Pressing the Selection button (1) restores
the selection list.
The sequence test ends automatically when:
– the SD301 is removed from the KE
– the KE is reset, or
– the KE is switched on and off.
Bosch Rexroth AG
6.3 System
This menu contains the items SD301 Config-
uration and Power On Menu.
Fig. 37:
Settings from the SD301 Config-
uration and Power On Menu can
also be made in BS300 in the
menu System → KE system dis-
play configuration.
43/48