Installing The Ooma Scout - ooma Hub User Manual

With your ooma Hub device installed, all that's left to do is connect each of your other phones to an ooma
Scout™ device. Each additional phone on the same phone line (or that will share the same phone number) as
the ooma Hub must be connected to an ooma Scout.
Your initial setup will look like:
Phone Jack
To connect a phone to an ooma Scout:
If you have DSL, trace the phone cable to the wall. Unplug and remove any existing DSL filters or
1
splitters. Note: Some DSL filters and splitters are mounted flat on the wall jack.
Unplug the phone cable from your phone and plug it into the port labeled
2
Use a phone cable to plug your phone into the port labeled
3
cable is provided).
Plug one end of the AC adaptor into the port labeled
4
a power outlet.
Now your setup should look like this:
Phone Jack Power
After 30 seconds, the clear ooma Tab at the top left corner should turn blue. Pick up the phone connected to
the ooma Scout and you should hear the signature ooma dialtone.
WALL PHONE

installing the ooma scout

Phone Jack
DSL Filter
WALL
on the ooma Scout (a short phone
PHONE
on the ooma Scout and the other end into
POWER
on the ooma Scout.