Manual Time And Date Settings; Daylight Saving Time - Timex T1308 Manual

Preset tuning alarm clock radio with usb charging and mp-3 line-in

Hide thumbs

Table Of Contents

Table of Contents

NOTICE: This product is equipped with the 'Auto-Set' feature and is programmed for

Eastern Standard Time. If you are located in another time zone, please change the setting

to the proper time zone.

1. Slide the

On/Off Lock switch on the bottom panel to 'Off'. The unlock indicator will

appear on the display.

2. Press the

Time Zone Button, the current Auto-Set Time Zone will ﬂash. Press the

<< and

current time setting. There are seven zones

Auto-Set Time Zones

ATL : Atlantic Standard Time

EAS: Eastern Standard Time

CEN: Central Standard Time

MTN: Mountain Standard Time

4. Press the

Enter Button.

1. To change the time setting, press the

clock display will ﬂash. Press the

button for a few seconds to set the time rapidly). Be sure to set the correct AM/PM

time, shown by the PM indicator. There is no AM indicator.

2. Press the

Enter Button. The clock will beep twice and the display will stop ﬂashing.

3. Press the

Date Set Button. The current year setting will ﬂash on lower right screen.

Press

<< and

current month/date will ﬂash. Press

Enter Button to exit.

The

DST Switch is located on the bottom panel.

1. Depending on your location and if Daylight Saving Time (DST) is observed, you can

manually switch DST on (+1), OFF or use the AUTO setting.

2. To manually turn on the DST function, just set the

will appear and the time will advance 1 hour.

3. To manually turn OFF the DST function, set the

go back 1 hour.

4. Set the

DST Switch to AUTO to have the unit automatically adjust the time at the

beginning and end of Daylight Saving Time each year.

>> Buttons to select your time zone. The display will show each zone's