Setting The Buzzer Alarm; Checking Your Alarm Time Settings; Turning Off The Alarms - Timex T309TT User Manual

Setting the Buzzer Alarm

1. Press and hold the
2. Press the Reverse or
3. See Step #4 in the Setting the AM/FM Radio Alarm section for instructions on setting the Buzzer Alarm's
7-5-2 Advance Alarm.
4. After you have programmed the buzzer alarm, press the
the clock display. The Buzzer Alarm Indicator will appear on the display, showing that the alarm is set.

Checking Your Alarm Time Settings

To check any of the three alarm settings, press one of the Alarm Buttons twice so that the settings appear
on the display. The display will return to the standard clock display after a few seconds. After you have
checked the setting, be sure the Alarm Indicator still appears on the display, so that the alarm will sound.

Turning Off the Alarms

1. After the alarm sounds, press the
programmed 7-5-2 Advance Alarm settings. To turn off an alarm and cancel its 7-5-2 settings, press its
Alarm Button so that its Alarm Indicator no longer appears on the display.
2. If the Off/Reset Button is not pressed, the alarm will sound for an hour before stopping. As long as an
indicator appears on the display, the alarm will sound according to the 7-5-2 Advance Alarm settings.
3. To activate the snooze feature, press the
shut off for approximately nine minutes before sounding again. The feature can be repeated several times
during the one-hour snooze cycle.
Operating the Alarms (Continued)
Buzzer Alarm Button until the alarm setting appears on the display.
Forward Button to set the alarm time.
Off/Reset Button to turn off the alarm while still maintaining the
Snooze/Dimmer Bar when the alarm sounds. The alarm will
Enter Button or wait ten seconds to return to
11