Timex T1308 Manual page 7

Programming the Preset Radio Stations
This unit has five Radio Preset Buttons for guests to find local stations.
1. Press any Radio Preset Button (1 -5) to turn the unit on to the currently assigned
preset station.
2. Press either the
few seconds to scan the dial quickly for the next clear station).
Note: Extend the wire antenna fully for better FM reception.
3. Press and hold the desired Radio Preset Button to set the current station. The unit
will beep twice.
When staff is done setting up the unit, slide the On/Off Lock Switch on the
bottom of the unit to 'On'.
Setting and Operating the Alarm
1. Press the Alarm Set Button. The wake time on the display will flash.
2. Press the
<< and
to advance the time quickly).
3. For wake to buzzer, press the
unit will beep twice and the Buzzer Alarm Indicator will appear, showing that the
alarm will sound at the set time.
4. For wake to radio, press the desired Radio Preset Button then
to set the alarm wake time. The unit will beep twice and the Radio Alarm Indicator
will appear, showing that the alarm will sound at the set time.
5. When the alarm sounds, press the
Snooze time, or press the
Alarm Off Indicator will appear.
Note:
• Pressing
The Alarm ON/Off Button also selects alarm mode.
• While setting the alarm, if the
button push will be ignored and buzzer alarm will be activated after pushing the
Enter Button.
<< and >> Buttons to tune unit to a different station (hold for a
General Operating Instructions
>> buttons to set the alarm time (hold for a few seconds
Alarm ON/Off Button to shut off the alarm. The
Alarm ON/Off Button while alarm is sounding, turns off alarm.
Enter Button to set the alarm wake time. The
Snooze / Dimmer Bar for a 9-minute
MP-3 / Aux Line-in Button is pushed, the
¸
6
Enter Button