Siemens SIMATIC NET TeleControl S7-1200 CP 1243-1 Operating Instructions Manual page 97

Status
8410
8411
8412
8413
8414
8415
8416
8417
8418
8419
8420
8421
8450
84xx
8500
8501
8502
8535
8550
8554
85xx
CP 1243-1
Operating Instructions, 12/2016, C79000-G8976-C365-02
Meaning
It is not possible to read via the connection. Possible cause: The communications partner
terminated the connection or the connection was aborted.
Sending the e-mail failed. Cause: There was not enough memory space for sending.
The configured DNS server could not resolve specified domain name.
Due to an internal error in the DNS subsystem, the domain name could not be resolved.
An empty character string was specified as the domain name.
An internal error occurred in the cURL module. Execution was aborted.
An internal error occurred in the SMTP module. Execution was aborted.
Requests to SMTP on a channel already being used or invalid channel ID. Execution was
aborted.
Sending the e-mail was aborted. Possible cause: Execution time exceeded.
The channel was interrupted and cannot be used before the connection is terminated.
Certificate chain from the server could not be verified with the root certificate of the CP.
Internal error occurred. Execution was stopped.
Action not executed: Mailbox not available / unreachable. Try again later.
Other error message from the e-mail server
Apart from the leading "8", the message corresponds to the three-digit error number of the
SMTP protocol.
Syntax error: Command unknown.
This also includes the error of having a command chain that is too long. The cause may be
that the e-mail server does not support the LOGIN authentication method.
Try sending e-mails without authentication (no user name).
Syntax error. Check the following configuration data:
Alarm configuration > E-mail data (Content):
Recipient address ("To" or "Cc").
•
Syntax error. Check the following configuration data:
Alarm configuration > E-mail data (Content):
Email address (sender)
•
SMTP authentication incomplete. Check the "User name" and "Password" parameters in
the CP configuration.
SMTP server cannot be reached. You have no access rights. Check the following configu-
ration data:
CP configuration > E-mail configuration:
•
– User name
– Password
– Email address (sender)
Alarm configuration > E-mail data (Content):
•
– Recipient address ("To" or "Cc").
Transfer failed
Other error message from the e-mail server
Apart from the leading "8", the message corresponds to the three-digit error number of the
SMTP protocol.
Diagnostics and upkeep
5.5 Processing status of e-mails
97