Download Print this page

Technical Characteristics; Maintenance - DeLonghi TCH8093ER Instructions For Use Manual

Ceramic fan heater
Hide thumbs Also See for TCH8093ER:

Advertisement

Replace the cover as shown in the figure. Old batteries are
harmful to the environment and must be removed and
disposed of in compliance with current legislation.

MAINTENANCE

-
Always unplug from the mains socket before
cleaning.
-
During the season when the appliance is in use, clean
the air intake and outlet grilles regularly using a
vacuum cleaner.
-
To clean the filter, remove the rear grille by pulling
it outwards (fig. 1). Remove the dust filter which
retains impurities in the air drawn in from the room,
blow on it lightly then replace in the appliance.
-
Never use abrasive powders or solvents to clean the
appliance.
TROUBLESHOOTING
PROBLEM
PF display and emits a beep
Product doesn't turn on
The appliance goes off unexpectedly
A green dot is flashing and unit is off

TECHNICAL CHARACTERISTICS

Power supply
Absorbed power
CAUSE
Temperature sensor is not working
properly
Check that the plug is connected to the
outlet
Auto-start is on
Room temperature reaches the set
temperature
Check that the plug is connected to the
outlet
The set temperature has been reached
or the time set on the timer has elapsed
The tip-over switch has been activated Make sure the appliance is standing
6
See rating plate
"
SOLUTION
The product needs to be serviced, contact
our toll free number for assistance
Plug in
Wait till time elapsed or press the but-
ton (E) twice to cancel the auto-start
and push the button (A)
Use the "+" button to increase the set
temperature
Plug in
upright on a flat surface, if the problem
persists contact our toll free number to
assist you

Advertisement

loading