Advertisement
•
To select minimum power press the button MIN (the red
LED will light up on the button).
•
To select medium power press the button MED (the red
LED will light up on the button).
•
To select maximum power MAX press both buttons MIN
and MED.
•
To turn off the appliance completely press the two
switches to OFF (the red LEDs will go out), rotate the
thermostat (B) to
power socket.
Models with fan
The appliance is equipped with a fan that provides even more
rapid and uniform heating.
The fan comes on when MED or MAX power is selected.
Adjusting the thermostat
When the room has reached the required temperature, turn
the thermostat knob (B) slowly anticlockwise until you hear
a click and no further. The LEDs of the switches will go out.
The temperature will be automatically maintained by the
thermostat. In spring or autumn or on mild days, you can save
energy by using minimum power.
TROUBLESHOOTING
PROBLEM
The appliance doesn't
work
, then remove the plug from the
CAUSE
The plug is not inserted properly into the pow-
er socket or the socket switch is off.
Check for any obstruction.
The switches are OFF.
The thermostat is set too low.
Freezing protection
With the knob of the thermostat (B) in position
of the power levels selected, the appliance will maintain the
room at a temperature of about 5°C preventing freezing with
minimum energy consumption.
MAINTENANCE
Before carrying out any maintenance, disconnect
the appliance from the mains and wait for it to cool
down completely. This appliance requires no particular
maintenance. It is sufficient to remove dust with a soft, dry
cloth. Never use abrasive powders or solvents. If necessary
remove areas of concentrated dirt with a vacuum cleaner.
TECHNICAL CHARACTERISTICS
Power supply
Power consumption
Insert the plug into the power socket and
switch on if necessary.
Remove the obstruction, disconnect the
power plug of the heater and let the ap-
pliance cool down. If the problem per-
sists,
Press the switches to positions MIN, MED
MAX
.
Turn the thermostat knob clockwise to higher
settings until the heater restarts.
6
See appliance rating plate
SOLUTION
contact
customer
and one
"
experience.
,
Advertisement
