Using The Bluetooth ® Device; M Pairing With A Bluetooth Device; M Settings For The Bluetooth Function - Icom IP501M Operating Manual

5
OPTIONS
Using the Bluetooth
■ Pairing with a Bluetooth device
This is an example of connecting the transceiver to a VS-3 Bluetooth headset.
1. Turning ON the transceiver's Bluetooth function
1. Hold down [FUNC] for 3 seconds to enter the Set mode.
2. Push [FUNC] or [Address] several times to select "Bluetooth."
3. Rotate [DIAL] to select "Enable," and then push [Call History] to turn ON the
Bluetooth function.
2. Entering the VS-3 Pairing mode
1. Confirm the VS-3 is turned OFF.
2. Hold down [PWR] for 6 seconds.
• The indicator quickly blinks red then blue, and then the headset enters the
Pairing mode.
NOTE:
• Charge the VS-3 before operating.
• The VS-3 starts up in the Pairing mode when its Bluetooth function
is ON, but no bluetooth device is entered in its Pairing list.
3. Pairing and connecting the Bluetooth device
1. On the transceiver, select "Search BT Device" in the Set mode, and then push
[Call History].
• The transceiver searches for a Bluetooth device.
L Push [CLR/Lock] to cancel searching.
• If found, the device's name and BD address are displayed on the screen.
(Example: ICOM BT-002)
2. Rotate [DIAL] to select the headset to pair and connect, and then push
[Call History].
• "Connect" is displayed when the pairing has completed.
3. Push [CLR/Lock] to exit the Set mode and return to the Standby screen.
• " " is displayed if the headset has correctly paired.
■ Settings for the Bluetooth function
You can customize the transceiver's Bluetooth settings in the Detailed Set mode.
See the Set mode section for details.
device
®
5-6
SET
Bluetooth
Enable
[PWR]
SET
Search BT Device
ICOM BT– 0 02 : 00
SET
Search BT Device
Connect
Indicator