Icom IP501M Operating Manual page 25

4
Set moDe
Set mode items
the shaded items are also displayed in the Basic Set mode.
L Items or default values may be different, depending on the transceiverʼs version or presettings. Ask your dealer for
details.
Item
Bt Auto Connect* Selects whether or not to automatically connect a
1
Bluetooth device.
Bt Sync Vol.* Selects whether or not to synchronize the Bluetooth
1
headsetʼs volume level with the transceiverʼs
volume level.
L When "Enableˮ is selected, the Bluetooth headset
volume can be set by rotating [DIAL].
Bt Connect Selects the Synchronous Connection-oriented
type* (SCo) link*
1
headset.
When "Auto Disconnect" is selected, the SCo link
is automatically disconnected after 2 seconds.
* A Bluetooth link for voice communication.
4
L this setting is valid only when a Bluetooth device
other than a VS-3 is used.
L When this item is set to "Auto Disconnect," the VoX
function is not usable.
Ptt & mic enables the user to select which microphone to
Switch* use.
1
L When this item is set to "Auto," transmits the audio
from the device whose [Ptt] is pushed.
Bt AF output* Selects the AF output device when a Bluetooth
1
headset is connected.
Bt echo Selects whether or not to enable the Bluetooth
Canceller* headsetʼs Echo Canceller.
1
Bt e-Cancel Sets the echo Canceller input gain for a Bluetooth
Gain* headset.
1
Bt e-Cancel Sets the echo Canceller delay for a Bluetooth
Delay* headset.
1
Bt Noise Cancel* Selects whether or not to enable the Bluetooth
1
headsetʼs Noise Canceller.
Bt Power Save* Selects whether or not to enable the Bluetooth
1
headsetʼs Power Save function.
L When "Enableˮ is selected, the Power Save function
automatically activates after 2 minutes of no
communication.
* Displayed only when "enable" is selected in the "Bluetooth" item.
1
Description
connection type of a Bluetooth
4
4-5
Option/range
enable or Disable
Disable or enable
Always Connect or Auto
Disconnect
Auto, Bluetooth mic, or
Radio mic
Bt only, Bt & SP
enable or Disable
–40 dB ~ +40 dB
0milliseconds ~
160milliseconds
enable or Disable
Disable or enable
Default
enable
Disable
Always
Connect
Auto
Bt only
enable
0 dB
35milli-
seconds
enable
Disable