Icom IP501M Operating Manual page 23

4
Set moDe
Set mode items
the shaded items are also displayed in the Basic Set mode.
L Items or default values may be different, depending on the transceiverʼs version or presettings. Ask your dealer for
details.
Item
LoG Deletes logs.
L Select "CLR," and then push [Call History] to delete.
ReSet Resets the transceiver to its defaults, except for
the Bluetooth pairing list.
L Select "YeS," and then push [Call History] to reset.
L the transceiver automatically restarts.
FIRm UP Updates the transceiverʼs firmware.
L Select "YeS," and then push [Call History] to reset.
L the transceiver automatically restarts.
L Updating the firmware takes approximately 10
minutes.
Success tone Selects whether or not to enable the tone that
indicates an individual call was successfully
transmitted.
L the transmission result is also displayed on the
screen.
Failure tone Selects whether or not to enable the tone that
indicates an individual call failed.
L the transmission result is also displayed on the
screen.
Call tone Sets the Call Initiation tone.
(IND/GRP/ALL/
teL)
Crtsy Beep Sets the Call termination beep.
(IND/GRP/ALL/
teL)
RX tone Sets the Call Receive tone.
(IND/GRP/ALL/
teL/mSG)
Notify type Sets the call receive notification type.
(IND/GRP/ALL/
teL)
Notify No. Sets the number of tones.
(IND/GRP/ALL/
teL/mSG)
RX Notify Vol. Sets the call or message received notification
volume.
out of Rng tone Selects whether or not to enable the out-of-Area
Warning Beep. the beep also sounds when the
transceiver reenters the service area.
(out-of-area: "Pipi," Reenters: "Popo")
VoX Selects a VoX function option.
the function automatically switches between
receive and transmit by detecting your voice.
Description
4-3
Option/range
– – –, CLR
No or YeS
No or YeS
enable or Disable
enable or Disable
Disable, tone1 ~ tone8
L Larger number makes
the tone lower.
Disable, tone1 ~ tone8
L Larger number makes
the beep lower.
Disable, tone1 ~ tone8
L Larger number makes
the tone lower.
P-Bell or Pocket beep
Continuous (except for
"MSG"), 1, 3, 10, 20
(times)
0 ~ 32
Disable or enable
Disable, Bluetooth mic
Default
– – –
No
No
enable
enable
tone1 (Pi)
tone1 (Pi)
Disable
P-Bell
3 (times)
10
Disable
Disable