Siemens SIMATIC NET RUGGEDCOM RSG2488F Installation Manual page 54

a
Siemens-specified severity levels
EMC Immunity Type Tests per IEEE 1613
Note
The RUGGEDCOM RSG2488F meets Class 2 requirements for an all-fiber configura-
tion and Class 1 requirements for copper ports. Class 1 allows for temporary commu-
nication loss, while Class 2 requires error-free and interrupted communications.
HV Impulse
Fast Transient
Oscillatory
Radiated RFI
Environmental Type Tests
IEC 60068-2-1
IEC 60068-2-2
IEC 60068-2-14
IEC 60068-2-30
IEC 60068-2-31
RUGGEDCOM RSG2488F
Installation Manual, 11/2019, C79000-G8976-1351-05
Test
Description
Signal Ports
DC Power Ports
AC Power Ports
Dielectric Signal Ports
Strength
DC Power Ports
AC Power Ports
Signal Ports
DC Power Ports
AC Power Ports
Earth Ground Ports
Signal Ports
DC Power Ports
AC Power Ports
Enclosure ports
ESD Enclosure Contact
Enclosure Air
Test
Cold Temperature
Change of Temperature
Humidity (Damp Heat, Cyclic)
Description
AC Power Ports
Description
Dry Heat
Free Fall
6.2 EMC and Environmental Type Tests
Test Levels
Test Levels
5 kV (Failsafe Relay Output)
5 kV
2 kV
1.5 kVDC
2 kV
± 4 kV @ 2.5 and 5 kHz
± 4 kV @ 5 kHz
2.5 kV Common Mode @ 1MHz
2.5 kV Common Mode
1 kV Differential Mode @ 1 MHz
35 V/m
± 2 kV
± 4 kV
± 8 kV
± 4 kV
± 8 kV
± 15 kV
Test Levels
Test Ad -40 °C (-40 °F), 16 Hours
Test Bd 85 °C (185 °F), 16 Hours
Test Nb 5 Cycles, -40 to 85°
C (40 to 185° F)
Test Db 95% (non-condensing)
55 °C (131 °F), 6 Cycles
Procedure 1, 2 falls from a
height of 250 mm (9.8 in)
Certification
Severity Levels
47