Physical and Electrical Characteristics
Analogue Input 1
Connector
Phantom power
Analogue Input 2
Connector
Analogue Outputs
Main outputs
Stereo headphone output
Headphone output power
Output level control (main and headphone)
Direct Monitoring
Other I/O
USB
Device Link
Front Panel Indicators
USB
Gain controls
Weight and Dimensions
W x H x D
Weight
TROUBLESHOOTING
For all troubleshooting queries, please visit the Focusrite Answerbase at
www.focusrite.com/answerbase
troubleshooting examples.
COPYRIGHT AND LEGAL NOTICES
Focusrite iTrack Solo is a trademark of Focusrite Audio Engineering Limited registered in the UK and
other countries.
iPad, iPhone and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
All other trademarks and trade names are the property of their respective owners.
2012 © Focusrite Audio Engineering Limited. All rights reserved.
, where you will find articles covering numerous
Balanced, via female 3-pin XLR on front panel
48 V phantom power switch
Unbalanced, via ¼" (6.35 mm) 2-pole jack socket
on front panel
Unbalanced, via 2 x phono (RCA) sockets on
rear panel
¼" TRS jack on front panel
16 mW into 50 ohms
On front panel
Front panel switch; allows zero-latency
monitoring of inputs
1 x USB 2.0 Type B connector
10-pin (proprietary)
LED (green); indicates active USB connection
Colour-coded LED rings: green (-24 dBFS) and
red (0 dBFS)
150mm x 45mm x 100mm
0.5 Kg
17