Frequency Control - ECS K7VTA3 Manual

System Component Characteristics
These items allow end users and technicians to monitor data provided by the
BIOS on this mainboard. You cannot make changes to these fields.
•
CPU Vcore (CPU core voltage)
•
Voltage Battery (battery voltage)
•
Current System Temp (degrees Fahrenheit and Celsius)
•
Current CPU Temp (degrees Fahrenheit and Celsius)
•
CPU fan speed (in RPMs)
•
Chassis FAN Speed (in RPMs)
•
Power FAN Speed (in RPMs)

Frequency Control

This item enables you to set the clock speed and system bus for your system.
The clock speed and system bus are determined by the kind of processor you
have installed in your system.
Phoenix – AwardBIOS CMOS Setup Utility
CPU Clock Ratio
Spread Spectrum
Auto Detect PCI Clk
Async AGP/PCI CLK
CPU Clock
↑ ↓ → ← : Move
Enter : Select
F5:Previous Values
CPU Clock Ratio
Enables you to set the CPU clock. The CPU clock ratio times the CPU
Host/PCI Clock should equal the core speed of the installed processor.
Example:
CPU Clock Ratio
CPU Host/PCI Clock
Installed CPU clock speed
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-
Magnetic Interference) generated by the system.
Auto Detect PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM and
PCI slots.
Frequency Control
[8 X]
[Enabled]
[Enabled]
[Sync]
[by keyin]
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults F7:Optimized Defaults
800 MHz
43
Item Help
Menu Level
F1:General Help
8
x 100