ECS K7VTA3 Manual page 9

Table of Mainboard Components
Label Component
AGP1 Accelerated Graphics Port
ATX1 Standard 20-pin ATX power connector
ATX12V Power connector
AUDIO1 Front panel MIC/Speaker Out header
AUXIN1 Auxilliary In header
BAT1 Three volt realtime clock battery
CDIN1 Primary CD-in connector
CPUFAN1 Cooling fan for CPU
CPU Socket CPU socket (mPGA478)
CNR1 Communications Networking Riser slot
DIMM1 ~ DIMM2 Two 184-pin DDR sockets
FDD1 Floppy disk drive connector
IDE1 Primary IDE channel
IDE2 Secondary IDE channel
JP1 Clear CMOS jumper
JP3 BIOS flash protect jumper
PANEL1 Panel connector for case switches and LEDs
PCI1 ~ PCI5 Five 32-bit add-on card slots
SATA1 ~ SATA2 Serial ATA header
SPDIFO1 SPDIF out header
SPK1 Speaker connector
SYSFAN1 System fan connector
USB3 ~ USB4 Connector for front panel USB ports
This concludes Chapter 1. The next chapter explains how to install the main-
board.
5