Figure 38. Installing a disk unit
__ 20. Do you have any additional disk units to install?
__ 21. Do you have any other devices to install?
__ 22. Install the enclosure shield cover for the disk unit.
__ 23. Install the front cover of the expansion unit.
__ 24. DANGER
__ 25. Plug in and power on all attached devices, such as printers and displays.
50
Setting Up Your 5065 or 5066 Expansion Unit V4R5
No
Yes
↓
Repeat steps 12 on page 48 through 19 on page 49.
No
Yes
↓
If you have another device such as a tape unit or CD-ROM drive,
go to the instructions that came with that device.
An electrical outlet that is not correctly wired could place hazardous
voltage on metal parts of the system or the products that attach to the
system. It is the customer's responsibility to ensure that the outlet is
correctly wired and grounded to prevent an electrical shock.
(RSFTD201)
Plug the following power cords into an electrical outlet.
v System-unit
v Console for the system