Chapter 2. Setting Up Your - IBM AS/400e Manual

Note: If you encounter difficulties during the installation, contact your authorized
__ 5. After your system unit has completely powered down, power off all PCs
__ 6. Unplug any power cords, such as for printers and display stations, that are
__ 7. Unplug the power cord for the system unit from the electrical outlet.
If you are setting up a 5065 Expansion Unit, go to "Chapter 2. Setting up your 5065
Expansion Unit" on page 7. If you are setting up a 5066 Expansion Unit, go to
"Chapter 3. Setting up your 5066 Expansion Unit" on page 17
6
Setting Up Your 5065 or 5066 Expansion Unit V4R5
dealer or service provider.
and devices, such as printers and display stations, that are connected to the
system unit.
connected to the system unit.